Ken Mitchell's Boeing 747-200 Panel

For problems with specific panels.

Moderator: Moderating Team

Post Reply
User avatar
a.trailblazer7
Pilot
Posts: 268
Joined: 16 Aug 2009, 03:12
Location: Sanford, NC

Ken Mitchell's Boeing 747-200 Panel

Post by a.trailblazer7 » 22 Mar 2010, 17:59

Was wondering if anyone has a problem getting the radio's in this panel to tune. The com's and nav radio's won't change and was wondering was there a trick that can be done like in Ken's 757/767 panel. I can get the transponder and ADF to change, nothing else. The rest of the panel is great. I got the panel from Flightsim.com

Name: b742rpan.zip Size: 13,341,095 Date: 09-15-2005 Downloads: 7,568
FS2004 Panel--Boeing 747-200. This panel was made for use with the Project Open Sky B747-200 V3. By Ken Mitchell.

Any help would be great. Thanks
Image
Much thanks to Fraser J. for making a great banner!!

Northwestdc9
Management/Moderator
Posts: 9866
Joined: 10 Jan 2005, 03:32
Location: Iowa City, IA
Contact:

Re: Ken Mitchell's Boeing 747-200 Panel

Post by Northwestdc9 » 23 Mar 2010, 01:37

If I recall, it's been a while, but if you look at the Radios section in the aircraft.cfg, there's a setting in there that allows the radio to be tunable. Check it out.
Image
Aviation Research Engineer - University of Iowa

User avatar
a.trailblazer7
Pilot
Posts: 268
Joined: 16 Aug 2009, 03:12
Location: Sanford, NC

Re: Ken Mitchell's Boeing 747-200 Panel

Post by a.trailblazer7 » 23 Mar 2010, 14:04

Checking into it now...thanks
Image
Much thanks to Fraser J. for making a great banner!!

Post Reply