Merge Instructions - Wilco/iFDG A32x

Northwestdc9 · Post by **Northwestdc9** » 09 Mar 2008, 18:11

Yeah that's definitely normal.

Yaroslav · Post by **Yaroslav** » 09 Mar 2008, 19:19

Hmmm... interesting. Never noticed that using IFDG's FDE.
Thanks for your support, guys.

CaseyD · Post by **CaseyD** » 09 Mar 2008, 19:40

Never noticed that using IFDG's FDE.

That's because it's iFDG.

Yaroslav · Post by **Yaroslav** » 09 Mar 2008, 21:20

CaseyD wrote:
Never noticed that using IFDG's FDE.
That's because it's iFDG.

With IFDG's planes you're sure to find yourself on a taxiway and not in the grass like with POSky ones

...

CaseyD · Post by **CaseyD** » 09 Mar 2008, 21:22

I guess I've never really had a problem with iFDG's FDEs, mainly everything else of theirs. Posky's FDE's are just hideous, the only one I can stand is the new ERJ one.

flytrumpet · Post by **flytrumpet** » 21 Mar 2008, 00:35

Took the plunge and decided to give this merge a try.Been using a PA/Wilco merge,but just curious to see how this one behaves.It seems IFDG is the airbus model Simairline recommends.
Will be operating BA398 EGLL-EBBR with a A319 later when my daughter goes to bed...she wants the PC now...arghh kids...

Thanks for the merge info.

Richard

Robbow93 · Post by **Robbow93** » 14 Sep 2009, 20:08

Hi
I did the Merge to the instructions but there is no Virtual Cockpit! Any answers why? Or does the merge only work for the 2D?

Many Thanks
Rob

FJ flyer · Post by **FJ flyer** » 14 Sep 2009, 20:30

Robbow93 wrote:Hi
I did the Merge to the instructions but there is no Virtual Cockpit! Any answers why? Or does the merge only work for the 2D?

Many Thanks
Rob

You cannot copy the Wilco VC because it's hard coded into the Wilco model. Only the 2D model.

Robbow93 · Post by **Robbow93** » 16 Sep 2009, 19:03

Alright ok Thanks!

ltnmad · Post by **ltnmad** » 25 Nov 2009, 17:59

Hello,

I find the aircraft started rotating by itself at about 100 knots (fully loaded). I presume I need to edit an entry in the config file, anyone any ideas?

Also the ailerons ceased and would not move at all and the elevators were slow to repsond.

Any ideas?

Thanks,
Dave

sanins192 · Post by **sanins192** » 25 Nov 2009, 18:58

It sounds like the merge needs some fine tweaking. Just trim the plane before you take off and it should solve your first problem.

Northwestdc9 · Post by **Northwestdc9** » 26 Nov 2009, 01:42

This is a known problem and is unavoidable when using this merge unfortunately.

When you increase to takeoff power, I usually use about 5 seconds of trim down in order to reset the system to neutral.

RSCB2B9596 · Post by **RSCB2B9596** » 03 Dec 2009, 21:44

Does anyone have a copy of their cfg file for this merge. I would love to take a look at it. I have merged the wilco panel with the IFDG aircraft but at cruise the throttles go from idle to 85% and keep swining back an forth. Quite annoying during flight but other than that the aircraft works great. I am doing the merge since there is a lack of textures for the wilco/ft 319 frontier airlines.

Thanks,

Tim

SimAirline.net - Message Boards

Merge Instructions - Wilco/iFDG A32x

Re: Merge Instructions - Wilco/iFDG A32x

Re: Merge Instructions - Wilco/iFDG A32x

Re: Merge Instructions - Wilco/iFDG A32x

Re: Merge Instructions - Wilco/iFDG A32x

Re: Merge Instructions - Wilco/iFDG A32x

Re: Merge Instructions - Wilco/iFDG A32x

Re: Merge Instructions - Wilco/iFDG A32x

Re: Merge Instructions - Wilco/iFDG A32x

Re: Merge Instructions - Wilco/iFDG A32x

Re: Merge Instructions - Wilco/iFDG A32x

Re: Merge Instructions - Wilco/iFDG A32x

Re: Merge Instructions - Wilco/iFDG A32x

Re: Merge Instructions - Wilco/iFDG A32x