FSX-compatible addons

For all non-SimAirline.net FS flying and add-on recommendations.

Moderator: Moderating Team

RatherBFlyin
Moderator
Posts: 3086
Joined: 09 Jan 2005, 06:52
Location: Apex, NC
Contact:

Post by RatherBFlyin »

Yes, it took me a while to figure it out as well. There is a folder called "SimObjects," which contains the "Airplanes" folder you need to add the aircraft into. They drop in just like in FS9.
User avatar
Dennis
Management/Moderator
Posts: 2861
Joined: 03 Jan 2007, 16:40
Location: Bayamon, Puerto Rico
Contact:

Post by Dennis »

It's official. POSKY's COPA aircrafts were incompatible with my FSX version. I did what everyone told me to do. I downloaded the files, unzipped them and placed them in that folder, yet FSX didn't recognize the aircrafts. I use the deluxe version of FSX...does that have anything to do with that?
Image
^^Courtesy of Fraser Jeffery. To SimAirline.net. It's been a blast!^^
*Click on the banner for the latest on Viewpoint, the official SimAirline.net blog*
User avatar
bapilot25
Pilot
Posts: 439
Joined: 10 Mar 2007, 02:38
Location: Watchung, NJ

Post by bapilot25 »

Most of the POSKY aircraft do work for FSX, THE 757-200, A340, I've heard more do work with the people i fly with.
User avatar
bapilot25
Pilot
Posts: 439
Joined: 10 Mar 2007, 02:38
Location: Watchung, NJ

Post by bapilot25 »

Great news, I don't know if you said this already or not but I like to share. The PMDG 747-400/747-400F is coming out for FSX. Saw it on aerosoft.com.

Can't wait
Image
Image
RatherBFlyin
Moderator
Posts: 3086
Joined: 09 Jan 2005, 06:52
Location: Apex, NC
Contact:

Post by RatherBFlyin »

I saw a chart on their site showing what was FSX compatible and what wasn't. I can't remember exactly where it was but when I get home I'll check for it again. I think I remember noticing though that their MD-11 will only be compatible with FSX, and not FS9.
Northwestdc9
Management/Moderator
Posts: 9866
Joined: 10 Jan 2005, 03:32
Location: Iowa City, IA
Contact:

Post by Northwestdc9 »

RatherBFlyin wrote:I saw a chart on their site showing what was FSX compatible and what wasn't. I can't remember exactly where it was but when I get home I'll check for it again. I think I remember noticing though that their MD-11 will only be compatible with FSX, and not FS9.
They haven't decided yet. Many people have asked for FS9 on their boards and they say they're not deciding yet.
Image
Aviation Research Engineer - University of Iowa
User avatar
Sean
Pilot
Posts: 1387
Joined: 03 Apr 2007, 15:44
Location: England
Contact:

Post by Sean »

i am planning to upgrade to fsx.
Will most aircraft and panels work?
Image
NWADC9
Pilot
Posts: 5845
Joined: 11 Mar 2005, 23:27
Location: Pittsburgh

Post by NWADC9 »

WHOA, Sean! Your banner is WAAAY to big!
Image
User avatar
Sean
Pilot
Posts: 1387
Joined: 03 Apr 2007, 15:44
Location: England
Contact:

Post by Sean »

im sorry
how do i make it smaller
Image
User avatar
detpilot
Moderator
Posts: 3636
Joined: 09 Jan 2005, 08:16
Location: Kalamazoo, MI
Contact:

Post by detpilot »

LOL!
Image
**Professional Banner Courtesy of Nick Anderson**
FAA Certified Commercial Pilot/ Flight Instructor
ASEL/AMEL/IFR
RatherBFlyin
Moderator
Posts: 3086
Joined: 09 Jan 2005, 06:52
Location: Apex, NC
Contact:

Post by RatherBFlyin »

Sean wrote:i am planning to upgrade to fsx.
Will most aircraft and panels work?
A good number of FS9 aircraft do seem to work adequately in FSX. However, FSX still has a number of issues and bugs that need to be worked out, so I would advise waiting a while before changing over completely.
NWADC9
Pilot
Posts: 5845
Joined: 11 Mar 2005, 23:27
Location: Pittsburgh

Post by NWADC9 »

Sean wrote:im sorry
how do i make it smaller
Requirements are 600x200 max. Basically, if it's larger than my banner, then it's a no-no. You can ask Nick for one, or I can do one as well.
Image
User avatar
Dennis
Management/Moderator
Posts: 2861
Joined: 03 Jan 2007, 16:40
Location: Bayamon, Puerto Rico
Contact:

Post by Dennis »

Sean wrote:i am planning to upgrade to fsx.
Will most aircraft and panels work?
I would recommend you do not make the change just yet. I have the deluxe version of FSX and only until recently it was acting up and slow. Today, I had to do some testing, and FSX, for no reason, proceeded as normal. However, before that, it was slower than a turtle.

So far, some of the airplanes I've tested are either non-compatible or half-compatible(somethings work, others don't).
Image
^^Courtesy of Fraser Jeffery. To SimAirline.net. It's been a blast!^^
*Click on the banner for the latest on Viewpoint, the official SimAirline.net blog*
User avatar
Seattleground
Pilot
Posts: 673
Joined: 06 Apr 2007, 23:34
Location: Tampa, FL

Post by Seattleground »

http://simairline.net/messageboards/vie ... php?t=5150

read this it will rly help u with ur aircraft! :P
Image
767 jet blast at its best(left engine)!!!!
User avatar
bapilot25
Pilot
Posts: 439
Joined: 10 Mar 2007, 02:38
Location: Watchung, NJ

Post by bapilot25 »

Yea Ive heard of this program, but never got into it, now its amazing, got a continental express 145 working. Tells you exactly what's not right and just a fewe clicks and its done, great find.
Image
Image
User avatar
Seattleground
Pilot
Posts: 673
Joined: 06 Apr 2007, 23:34
Location: Tampa, FL

Post by Seattleground »

i know its the best for me because i fly for simairline and i have fsx it has rly helped me
Image
767 jet blast at its best(left engine)!!!!
NWADC9
Pilot
Posts: 5845
Joined: 11 Mar 2005, 23:27
Location: Pittsburgh

Post by NWADC9 »

Here's my list. The criteria:
1. A panel for the aircraft must be available and work in FSX
2. Jetway/GSE door points must be available IF applicable

So, here's my list:

Project Airbus A320 (WARNING: Watch out for the antennas and satellite dish leaving holes in the fuselage. There's a fix on their forum for some paints)

Erick Cantu EMB-120 (The whole kit and caboodle in the fleet page for Delta)

PMDG B1900D

Dreamwings EMB-170

I'll check the SGA DC-9-50 I downloaded a while back that claimed to be an "FSX version", which I know works, but I'm not sure if there were door points.
Image
User avatar
steve63
Pilot
Posts: 402
Joined: 27 Jan 2005, 17:54

Post by steve63 »

I don't think I will be using FSX any time soon. I have too much time and money invested in FS9 (my huge amount of AI is another story) and buy the time I will be able to buy a new computer the next FS game will probably be out.

I tried a friends FSX out on my computer and the frame rates were awful
and I don't like watching a slide show. It makes a cross wind landing imposible.
Image

Image
NWADC9
Pilot
Posts: 5845
Joined: 11 Mar 2005, 23:27
Location: Pittsburgh

Post by NWADC9 »

It's actually not that bad. My computer can run FS9 fairly decent, as well as FSX.
Image
seahawks7757
Pilot
Posts: 4352
Joined: 18 Jul 2007, 04:57
Location: Puyallup, WA AKA KSEA
Contact:

Post by seahawks7757 »

same here. I like it better
Image
Click on the banner above to get to my Flickr Account!
Post Reply